5 EDISON SENIOR RAIL ASSEMBLY INSTRUCTIONS
Mount End-Leg Cap and End Leg to Rail
Flip the first rail of the run upside down onto a
soft surface. Attach an end cap to one end of
the rail segment using 4 (0000822) push rivets.
Next attach the end leg to the bottom of the rail
segment using 4 (0001140) screws. You will
repeat this step for the end-of-run rail segment
as well.
Please note: a 90 degree bit is helpful
for this step.
Mount Mid-Leg Cap to Rail
If attaching another rail segment, attach a mid-leg cap
using 4 (0000822) push rivets on the other end of
the rail. Repeat this step for all middle rail segments,
adding two mid-leg caps to each mid-segment rail,
and one end-leg cap to each end-segment rail.
M6-1.0x12mm Low
Profile Cap Screw
(0001140)
Plastic Reusable
Push Rivet
(0000822)
Plastic Reusable
Push Rivet
(0000822)
1.
2.