Watson-Marlow 520DuN IP66/NEMA 4X User Manual
39
Program
Select
Program
using the
UP
or
DOWN
keys and press
ENTER
to confirm.
The pump offers two choices:
mA
and
V
. Use the
UP
or
DOWN
keys to
make a selection and press
ENTER
to confirm your decision.
The pump displays a screen allowing you to set the speed for low signal
input. Use the
UP
and
DOWN
keys to scroll the display to your chosen
speed and press
ENTER
to confirm the figure.
The pump displays a screen allowing you to set the speed for high signal
input. Use the
UP
and
DOWN
keys to scroll the display to your chosen
speed and press
ENTER
to confirm the figure.
If a mistake is made, the user may press
STOP
at any point in the
sequence (before pressing
ENTER
on the high signal speed screen), and the
pump will display the previous screen.
The final press on
ENTER
causes the pump to configure the hardware and
programmed response data. It briefly displays a confirmation screen and a
warning that the analogue signal is not trimmed, and returns the user to the
Analogue setup menu. Example values are shown here.
