8
Pump specifications
8.1
Specification ratings
Operating temperature
5C to 40C (41F to 104F)
Storage temperature
530: -40C to 70C (-40F to 158F)
Humidity (non-condensing)
80% up to 31C (88F) decreasing linearly to 50% at 40C (104F)
Maximum altitude
2000m (6560ft)
Power consumption
530: 135VA
Supply voltage
Filtered 100-120V/200-240V 50/60Hz 1pH
Maximum voltage fluctuation
+/-10% of nominal voltage. A well regulated electrical mains supply
is required along with cable connections conforming to the best
practice of noise immunity
Full load current
530: <0.6A@ 230V; <1.25A @ 115V
Fuse rating
530: Ceramic, 5x20mm, 2.5A, 250V AC, Time Delay
Installation category
(overvoltage category)
II
Pollution degree
2
IP
IP31 to BS EN 60529 if supplied with N module then IP66 to BS EN
60529. Equivalent to NEMA 4X to NEMA 250 *(indoor use - protect
from prolonged UV exposure)
dB rating
530: < 70dB (A) @ 1m
Control ratio
530: 0.1-220rpm (2200:1)
Maximum speed
530: 220rpm
8.2
Weights
530
Drive only
+ 520R, 520R2
+ 520REL,520REM,
520REH
+ 505L
IP31
9.7kg
21lb 6oz
10.6kg
23lb 5oz
10.5kg
23lb 3oz
12.2kg
26lb 14oz
IP66
10.6kg
23lb 5oz
11.5kg
25lb 5oz
11.4kg
25lb 2oz
13.1kg
28lb 13oz
Weights warning
Some pumps weigh more than 18kg (the exact weight depends on the
model and pumphead - see on the pump). Lifting should be performed
according to standard Health and Safety guidelines. Finger recesses
are built into the sides of the lower shell for convenience in lifting; in
addition, the pump can conveniently be lifted by grasping the
pumphead and (where fitted) the 'N' module at the rear of the pump.
m-530sn-gb-02
13
