Table 20 - EDS compatibility guide
EDS file
(Found on
website)
EDS release
Date
Pump
Models
Compatible
with pump
software
versions
Version comments
530/630/730
EtherNet/IP
EDS Rev 2.5
control file
January
2021
530En,
630En,
730En
0.41.03
Addition of PressureSwitchError
(parameter 106), use of bit 7 in general
alarm for PressureSwitchError, use of bit 6
in general alarm for DispenseInturrupted,
AssetNumber (parameter 63) moved to
acyclic data records, parameter 61 and 62
name change to AnybusNetworkMode
and AnybusNetworkActive,
Link to EDS file location:
1.
Navigate to:
https://www.wmftg.com/en/literature/other-resources/software-and-devices/
Notes:
1.
If your pump software is compatible with multiple EDS files versions it is recommended to use
the latest version available.
2.
In order to find your pump software version, select
Help
, then
Software
on your pump
3.
The correct EDS file version must be used in combination with the pump software versions
listed for good communication between the pump and control system.
4.
Networks using pumps with different software and EDS versions are acceptable as long as
each pump is using the correct EDS version
20
Sensors
Sensors can be connected to the pump to display the value, warnings and errors on pressure and or
flow as selected.
Attached sensors allow the user to configure warning and alarm set points on the pump.
Each pump can support a maximum of one flow sensor and one pressure sensor at the same time.
m-730en-en-09 02-02-22
91
