Watkiss Automation Plockmatic PowerSquare 224, Workbook

Page: 39 / 56

Power and Control
Plockmatic PowerSquare™ 224 - Service Training Workbook
35
10.4 DFA
The DFA Finisher Interface PCB is the interface between the printer and the
finisher.
The following input and output signals are provided:
Status ouput signals from the PSQ Control input signals from the
printer
LEDs are RED . LED 11, 12 & 13 must be ON to
let the PSQ run online.
LEDs are GREEN .
LED11 ST0 LED off = Offline LED19 C0 Sheet exit
LED12 ST1 LED off = Fault LED20 C1 End of set
LED13 ST2 LED off = Full LED21 C2 Cycle up
LED14 ST3 Pulse = sheet delivered LED22 C3 End of job
LED15 ST4 Pulse = set delivered
Sheet Exit
End of set
Cycle up
End of job
Printer
Offline
PowerSquare
Fault
Full
Sheet Delivered
Set Delivered