Machine Areas
28
Plockmatic PowerSquare™ 224 - Service Training Workbook
Review the following:
ADJ 4.9.1 (Calibrate the Trim Stop)
ADJ 4.9.3 (Check and Adjust the Trim Stop for Square)
Use the RAPs to diagnose and repair the problem created by the trainer.
8.9
Outfeed and Stacker
When the trim clamp is released, two solenoids move the trim stop from below
the book. The book is moved out of the trimmer by the book eject belt. A
conveyor moves the books from the PSQ and drops them on the catch tray. An
adjustable collection-table makes sure the finished books stack correctly. There
is an optical sensor in the outfeed to detect jams. This sensor prevents the
books on a full stacker from backing-up into the outfeed.
Locate the following:
Outfeed Flow Optical Sensor
Stacker Motor
Perform this task:
REP 4.20.3 (Remove the Stacker from the PSQ)
Summary of Contents for Plockmatic PowerSquare 224
Page 55: ......
