STYLE No. HNKM70, HN70KM
Henry One Hole Gooseneck Kitchen Faucet
with Pull-Down Spray and Metal Lever Handle
PAGE 3 OF 6 | UPDATED ON 5.9.2018
PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM
INSTALLATION GUIDELINES
MOUNTING BRACKET
THREADED ROD
METAL WASHER
BARREL NUT
SUPPLY HOSE
4.
Slide the MOUNTING BRACKET over the HOSES and
THREADED ROD, place the METAL WASHER onto the
THREADED ROD then thread and securely tighten the
BARREL NUT onto the THREADED ROD.
NOTE:
Ensure the METAL WASHER fits properly around
the HOSES.
SLEEVE
SCREW
[LOOSEN ONLY]
[5mm HEX]
SCREW
[SECURELY
TIGHTEN]
WEIGHT
[ADJUST
POSITION]
WEIGHT
SLEEVE
SPRAY
HOSE
1.
2.
3.
[HOLE FOR
SPRAY HOSE]
SPOUT
SPRAY HOSE
[MALE END]
5.
Loosen, but do NOT remove, the SCREW on the WEIGHT
using 5mm HEX KEY then remove the INTERNAL SLEEVE.
Place the SLEEVE over the NYLON SPRAY HOSE then
slide the WEIGHT over the SLEEVE then securely tighten
the SCREW to secure the WEIGHT in the desired position.
6.
Insert the MALE END of the NYLON SPRAY HOSE through
the bottom of the SPOUT until it protrudes from the end
of the SPOUT.
