STYLE No. HNKM70, HN70KM
Henry One Hole Gooseneck Kitchen Faucet
with Pull-Down Spray and Metal Lever Handle
PAGE 2 OF 6 | UPDATED ON 5.9.2018
PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM
INSTALLATION GUIDELINES
RUBBER WASHER
[DO NOT REMOVE]
THREADED ROD
[DO NOT REMOVE]
MOUNTING
BRACKET
METAL WASHER
BARREL NUT
[M8 THREAD]
1.
Unthread and remove the BARREL NUT from the
THREADED ROD, then remove the METAL WASHER and
MOUNTING BRACKET.
NOTE:
Do
NOT
remove THREADED ROD or RUBBER
WASHER beneath the ESCUTCHEON.
SPOUT
SUPPLY TUBE
[RED LABEL]
SUPPLY TUBE
[BLUE LABEL]
SUPPLY HOSE
SUPPLY HOSE
SUPPLY HOSE
MOUNTING
SURFACE
SPRAY
SUPPLY HOSE
RUBBER WASHER
ESCUTCHEON †
HANDLE ‡
[RIGHT SIDE
ONLY]
SPOUT
‡ RIGHT HAND HANDLE
INSTALLATION ONLY
† A RUBBER WASHER for the
ESCUTCHEON is provided.
If desired, a bead of caulk or clear
silicone may be applied where the
ESCUTCHEON contacts the
mounting surface.
2.
Thread and securely tighten the SUPPLY HOSES onto the
SUPPLY TUBES installed on the SPOUT.
NOTE:
The HOSES are M10 x 3/8” COMPRESSION
CONNECTOR HOSES and the SUPPLY TUBES are marked
BLUE for cold and RED for hot.
3.
Insert the SPOUT through the hole on the mounting
surface making sure the RUBBER WASHER provided is
beneath the ESCUTCHEON and the HANDLE is aligned on
the RIGHT SIDE of the SPOUT.
NOTE:
The HANDLE can
ONLY
be installed on the RIGHT
SIDE.
