Training mode
Training mode is designed to set up and execute training plans in a user friendly and intuitive way
to increase the efficiency and joy of your training.
4.3 Settings menu
Backlight
To set the required backlight level, push up and down button until reach the desired level of
backlight brightness.
Summary:
-
Back Button: Back to menu
-
Enter Button: No action
-
Up Button: Increase backlight
-
Down Button: Decrease backlight
Logging
Waterstars can save the measured data (time, acceleration, stroke rate, speed and GPS
coordinates) of any training for further analysis. On default, the intervals are saved to the
internal memory in separate files. In case of full trainings
With the Enter Button, then the system returns a message: „Now logging!” in the case the
logging is on. By pushing the enter button again, the message is „Logging stopped!”, in this case
the instrument does not save any data to the internal memory until the next restart.
The logging mode has no relation with the „Memory mode”.
Date & Time
This menu is to display and set the time and date.
The Date and Time is displayed in the order: Year/Month/Day. By touching the enter button, it is
possible to step between each character. Set the values with the Up/Down buttons. Then by
touching the back button, the system asks to save changes, then returns to the main menu.
Summary:
-
Back button: Security question
-
Enter button: Switch between the characters
-
Up Button: Change the value one higher
-
Down Button: Change the value one lower
