General electrical
supply
Terminal
block
Interconnection
between the external unit
and the hydraulic module
figure 32 - Connections to outside unit’s terminal block
Remove the cap
(1 screw)
Brackets (4 places)
Remove the
front panel
(2 screws)
Bracket
(3 places)
Remove the cap
(2 screws)
Brackets
(4 places)
2 .11 .5 Electrical connections
on the outdoor unit side
Access to the connection terminals:
•
Model extensa duo + 5, 6 & 8
- Remove the cap.
•
Model extensa duo + 10
- Remove the front panel, remove the cap.
- Make the connections in accordance with the diagram
figure 32
- Use cable clamps to prevent the conductors from
being disconnected accidentally.
- Fill in the space where the cables enter the outside
unit with the insulating plate.
figure 33 - Access to outside unit’s terminal block
Installation and operating manual "1585 - EN"
Air to Water Heat Pump (Split integrated DHW type)
- 32 -
"
Model Comfort 5, 6 & 8
"
Model Comfort 10
•
Model Comfort 5, 6 & 8
•
Model Comfort 10
