Step 3 (alternate) –
Remote Control Cable Installation
The stereo control cable connects the Boost Box to the 5-pin
wired remote control port on the rear of the stereo. The
smaller, 3.5mm plug connects to the Boost Box and the
larger 5-pin plug connects to the stereo.
If there is a Clarion wired remote already installed in the
cockpit of the boat, the Boost Box can be connected directly
to this remote. The factory installed Clarion wired remotes
will always have a very short cable that connects to an
extension cord directly behind the remotes. The Boost Box
can be connected to both the factory remote and the
extension cord so that the both the Boost Box and the
Clarion remote can control the stereo.
Note: Some newer Clarion stereos use an 8-pin wired
remote control connection. If these stereos are not
compatible with the IR remote transmitter, a 5-to-8 pin
adapter cable is available (sold separately) from
Watersport Innovations, or directly from Clarion.
Chapter 1
Installation Instructions
Sony Stereo
6
Summary of Contents for boost box WSI 1103
Page 15: ...enjoy the ride...
