www.watersnake.com.au
9
50 AMP FUSE
BLACK CABLE
( NEGATIVE - )
RED CABLE
( PO )
Remove side covers to expose mounting plate.
After the motor is mounted, replace covers.
There are two ways to attach your motor to your boat:
Option 1
- Direct installation of the motor to your boat without a
quick release bracket.
Option 2
- Installation of the motor to you boat with an optional
quick release bracket.
To remove the side covers remove
the Phillips head screws as shown.
To re-attach a side cover, place it
into position and resecure screws.
Do not overtighten the screws.
Fit bolts down
through mounting
plate and foredeck.
Mounting plate
PLEASE NOTE:
Watersnake accepts no liability for personal injury or property damage caused while
fitting this motor. Please wear appropriate protective clothing and eyewear/face
protection. Avoid contacting and/or inhaling fibreglass dust or aluminium shavings.
PLEASE NOTE:
Option 2 is the preferred method for mounting the Geo-Spot motor. It allows
for quick and easy dismounting and remounting of the motor. Watersnake
has two alternate Quick Release Brackets available and these are outlined on
pages 11 & 13 of this manual. Watersnake Quick Release Brackets are readily
available at stockists of electric trolling motors or online.
INSTALLATION
Watersnake Geo Spot GPS Manual v3 2021.indd 9
18/5/21 4:31 pm
