www.watersnake.com.au
39
TROUBLE SHOOTING
REMOTE CONTROL
• Blank remote screen – not operational – 3 x AAA batteries may need
replacement. Phillips head screwdriver required.
• Screen message “No Connection” –
x Check Base Unit has powered up and status light shows GREEN
x Try restarting base assembly processor and Remote control by
powering off and restarting each.
x Check pairing of remote with base unit by pressing left “Pairing”
button on base when remote is on. “Shave-and-a-haircut” peeps indicate
pairing established.
ERROR MESSAGES
If an error message is displayed on the Remote Control FOB unit, an error
has occurred with the motor control system. Please note the contents of the
error message and/or photograph the FOB display message and contact
Watersnake Service via the website contact centre (https://www.jarviswalker.
com.au/contact) to receive more detailed instructions on how the problem can
be resolved.
OPTIONAL FOOT CONTROL
• Check that remote is selected for manual mode
• Check that foot control cable plug is firmly connected and locked in.
• Check for debris that may affect operation of pedal controls and cable
connections.
• Check speed control dial is not set to zero
• Restart base unit and recheck.
Watersnake Geo Spot GPS Manual v3 2021.indd 39
18/5/21 4:31 pm
