Watersnake Fierce SWRF 54/48, Owner'S Manual

Page: 13 / 24

www.watersnake.com.au
13
MAINTENANCE
Your Watersnake Electric Motor should provide many seasons of dependable
service. However, like any tool, electric motors must be cared for.
After each day of fi shing, the motor should be cleaned thoroughly. A light
rinse with fresh water (do not direct a high pressure stream of water at the
motor) and wash with warm soapy water to remove any remaining salt / debris
particles should be completed. It is good practice to pay particular attention
to areas that are likely to hold salt / debris particles such as the shaft of the
motor and the area surrounding the turning motor housing where the depth
collar sits when the motor is deployed.
NOTE – The above cleaning routine should also be followed even if the motor
has been used in fresh water. Dust / dirt can still build up in fresh water
environments.
Dry excess moisture from the motor and sparingly lubricate all friction points
– a pressurized spray lubricant is ideal. It is important to keep the shaft of
your motor as smooth as possible to avoid deployment issues. A light coat of
wax or a coating with a spray lubricant should be applied to the shaft a couple
of times a year.
Periodical general maintenance (once or twice a year depending on use)
• Remove side covers from the mounting assembly and clean any build up
of dirt / debris that may be present on the inside of the bow mount assembly
(mounting bracket). Applying harsh chemical cleaners is not recommended
– warm soapy water should be suffi cient.
• While side covers from the mounting assembly are removed apply marine
grade grease to the quick lock and release mechanism. Do not use grease
that may contain lead particles.
• Check for any loose screws / bolts / fi ttings and tighten as required.
• Check wiring / terminals for any sign of corrosion or build up of debris
• Check fuse or circuit breaker for any sign of corrosion or build up of debris
FIERCE