www.watersnake.com.au
23
INITIAL POWER-UP
• Attach your Watersnake Fierce 2 motor to a 12 volt deep cycle battery.
For full instructions on this see page 15.
• Deploy the motor and ensure locking lever is in the up position.
NOTE:
Your Watersnake motor is fi tted with a tilt switch that prevents the
motor from running unless it is in the deployed (vertical) position.
NOTE:
Your Watersnake remote control unit will already be paired to the
motor out of the box. If it is not please refer to the pairing instructions on
page 25.
Motor in
deployed
position
Summary of Contents for FIERCE 2 54LB/48
Page 34: ...Watersnake Fierce 2 Bow Mount Motor Manual Ver 1 34 SCHEMATICS AND PARTS LIST...
Page 36: ...Watersnake Fierce 2 Bow Mount Motor Manual Ver 1 36 SCHEMATICS AND PARTS LIST...
Page 38: ...Watersnake Fierce 2 Bow Mount Motor Manual Ver 1 38 SCHEMATICS AND PARTS LIST...
Page 40: ...Watersnake Fierce 2 Bow Mount Motor Manual Ver 1 40 SCHEMATICS AND PARTS LIST...