Watersnake FIERCE 2 54LB/48, Owner'S Manual

Page: 26 / 44

Watersnake Fierce 2 Bow Mount Motor Manual ( Ver.1)
26
REPLACING THE BATTERIES IN YOUR REMOTE
CONTROL UNIT
IMPORTANT:
We strongly advise you keep a spare set of batteries ( 2 x AAA ) in your boat
at all times as well as an appropriate screwdriver to open and close the
remote.
REMOTE CONTROLLER
STEP 1:
Unscrew the 4 phillip head
screws and remove the back
of the remote.
STEP 2:
gently pull up the circuit board to
access the batteries. Take care not
to damage the battery wires while
doing this. Remove the two old
AAA batteries and replace them
with new ones.
STEP 2:
Replace the circuit board carefully
back into place and place the button
membrane and front cover back into
place
STEP 3:
Making sure everything is in it’s
correct place replace the screws.
STEP 4:
Fully test the remote before
your next trip to make sure
everything functions as it
should. You may need to pair
the remote to your motor.
See page 25 for instructions on
pairing your remote.
AAA
AAA
T
N M
+
T
N
M
+