Specifications
These are the technical specifications for the
HydraPump® 12V Utility Submersible
:
• ¼ HP, 12V DC, 15A Max (12A Typical)
• Pumping Capacity 1,500GPH Max
• Maximum Head 20ft
• Recommended operating temperature 32°F to 120°F
• Pump construction is thermoplastic housing
Troubleshooting
Water Happens
Unexpected water can really put a damper on your day, but the HydraPump® 12V Utility
Submersible can help bail you out when jobs require quick, powerful, and portable pumping.
This battery power pump offers the ability to move water quickly in a variety of situation when
traditional power is not available:
• For remote use when outdoors camping or out on the farm, HydraPump® 12V Utility
Submersible can be on standby to move water to suit your needs.
• When pools or other water sources overflow during power outages, HydraPump® 12V
Utility Submersible can be put into action quickly to prevent water damage.
• Being prepared in times of weather, HydraPump® 12V Utility Submersible can help
keep a peace of mind that water can be moved quickly when needed.
HydraPump® 12V Utility Submersible can help move water in these and countless other
situations!
The HydraPump
®
12V Utility Submersible
The HydraPump® 12V Utility Submersible technology is designed to efficiently transfer water
from one point to another. Simply attach to the HydraPump® 12V Utility Submersible a
standard garden hose for an out of the box ready-to-go experience. With HydraSense™
technology, a height adjustable electrical sensor attached to the pump, water is detected and
the pump is automatically activated.
Note:
• This pump is meant to be used with clear water.
• The pump is meant to operate independently when sufficient water is detected or
continuously when attended. The sensor can have its position adjusted to a desired
height.
• The pump is submersible and can operate underwater.
• This pump is often used to move large amounts of water from one basin or location
to another.
• Always be cautious when using pumps around water!
Arrival and Inspection
Be sure to examine HydraPump® 12V Utility Submersible package contents before use.
Your box should include:
• 1pc. HydraPump® 12V Utility Submersible
• 1pcs. For outlet assembly: 1-¼” NPT to ¾” GHT (Garden Hose Adapter)
• 1pc. manual packet
There are circumstances where the pump or its parts can become damaged during shipping. If
damaged during shipping, please contact Watershed Innovations customer service.
08
01
More Information
PRoblem
Possible Causes
SOlutions
Pump will not start
Battery Not correctly connected
to a 12 volt (V) battery
Correctly connect the
alligator clips from the pump
to the battery
Battery is not charged
Charge the battery
Bad Battery
Replace battery
Obstructed Impeller
Remove power and clean the
impeller
Pump is very slow or
limited
Inlet clogged
Clean debris from the
exterior of the pump
Restriction in the outlet hose
Check for kinks and
restrictions, shorten the
length if possible
Too much lift
Reduce the outlet hose
height from the pump outlet
to improve the flow rate
Low battery
Charge the battery
