Watersavers WLDS-10 Mk3 Installation & Commissioning Download Page 20 | Manualshive

Page: 20 / 20

Watersavers WLDS-10 Mk3 Installation & Commissioning Download Page 20

11-SPECIFICATION

Power requirements: Universal input 100-240v AC 50/60Hz, power consumption 30W

Pulse Meter input: 24v DC 5mA maximum for one reed switch type pulse meter, suitable for
1, 5, 10 or 100 litres per pulse output

Alarm output: Normally open free relay contact rated at 5A resistive load 250v AC / 30v DC

Valve output: Free relay contact rated at 5A resistive load 250v AC / 30V DC programmable as
Normally Open or Normally Closed with timed service function - see section 5

Additional outputs: two alarm contacts are available – please see section 7 WLDS-10 Alarms

24v DC PSU: 1.1A maximum available for powering alarm or valve

Parameters: Maximum Flow: Litres input range 1 – 32,767, time period range 1 minute - 45
hours, number of High Alerts to alarm: 1-99.
7 day timer allows daily High Flow periods to be entered

External HF/LF input: overrides internal clock – see section 5

LCD display: 2x 16 ASCII character with LED backlight

Keypad: with tactile feedback, 0-9 numeric keys plus navigation keys for parameter setting and
monitoring

Real Time clock: displaying day and time (24Hr format) with automatic GMT/BST changeover
Battery backed (10 year life)

Connections: via DIN rail terminals maximum conductor size 4mm², cable entry via stuffing
glands in gland plate

Enclosure: Steel wall mounting overall dimensions 300 x 300 x 150mm (W x H x D) RAL7035
powder coated

Protection: to IP65 (nearest NEMA 4X) overall weight 5kg

Sales/Technical 01603 720999

Watersavers Limited

Earl Road

Rackheath Industrial Estate

Norwich Norfolk NR13 6NT

[email protected] www.watersavers.co.uk

WLDS-10_Mk3_instructions_071218

«
...
18
19
20

Summary of Contents for WLDS-10 Mk3





















Reviews:

No comments