2 Preparing the column heater
46
September, 2019, 715003738IVD Rev. C
To connect the PEEK tubing to the MS:
1. Remove the protective cover from the PEEK tubing from the flow cell
inlet in the MS.
2. Ensure that the label on the flow cell inlet tubing matches the type of
MS and flow cell in your system.
3. Attach the 0.004-inch or 0.0025-inch ID inlet tubing (included with the
flow cell or the stabilizer kit) to the column outlet.
4. Snap the column support clips onto the body of the column (one between
the reusable fitting and column). Rotate the clips so that their openings
face forward.
5. Place the column in the column compartment.
TP02952
MS inlet tubing
(PEEK) from column
Outlet
Inlet
Column support clip
Summary of Contents for ACQUITY UPLC I-Class IVD
