2. Seasonality:
The concentration of salts in water increases in some seasons due to lack of rainfall while in
other seasons, the water may be less saline.
3. Chemical treatment:
The amount of chemicals used to treat the water e.g. chlorine, fluoride, etc can lead
to inconsistencies in the water quality. Water is treated periodically by the local water authority leading to
times when the water may contain high doses of elements that can cause corrosion.
4. Manufacturer’s water requirements:
The requirements by individual water feed appliances such as combi
steamer ovens may vary from the specification produced by Xsential’s RO systems. The end user should be
made aware of this.
5. Wrong
installation.
6. Wrong TDS/water hardness output adjustment.
7. Service interval: it is very important that all of Xsential’s RO systems are serviced regularly. Failure to
service (replace filter cartridges) regularly can cause the RO system to not function properly. See the
installation manual for details.
Although all care has been taken by Xsential to ensure that its RO systems perform according to its manufacturer’s
specification, Xsential cannot guarantee the performance of its water treatment systems due to factors which are
beyond its control. Some of these factors have been listed above. End users should be made aware of the factors
that could affect the life of water feed appliances.
©
Copyright 2012
Unless otherwise stated, this installation manual is Xsential Pty Ltd copyright. No part of this manual may be reproduced, in whole or in part,
without the specific written permission of Xsential Pty Ltd.
