Assembly and Operating Instructions Sand Filter System without Pre-filter
14
English
Step 11:
If necessary, loosen the clamping ring carefully
using a rubber hammer to achieve a better sealing
and a uniform tensioning of the clamping ring.
Step 12: Only with 2260140 and 2260148 pump
Insert the rubber hose fitting (only included with
2260140 and 2260148 pump) into the connecting
hose and insert in on the upper pump connection
(as far as possible). Then fix it firmly with a hose
clip.
Step 13:
Fasten the hose to the middle hose connection
(labeled ‚Pump‘) on the top of the valve.
Step 14:
Fix the filter pump on the filter pallet using the
self-tapping screws.
Step 15:
If the hose connections do not seal well, you can
use Teflon tape for additional sealing. To do this,
wrap at least 15 times.
