26
SERVICE PROCEDURES
ENG2036-15/01/19
1
1
Turn ON the water supply and dispense
hot water to flush the remaining descaler.
Repeat step 8 to clean the ventilation tank
flush until water runs clear.
Turn the
green
compressor and heater
switch [22] ON and allow the hot tank to
heat up. Dispense to a glass and check the
temperature.
1
If you used the pincher, don’t forget to remove it from the machine after the descaling procedure is
finished. In every service maintenance the machine must be sanitised.
Please follow the instructions in chapter 3.2.
i
