WaterLogic WL 1000 GF Technical Manual Download Page 17

32

33

Waterlogic 1000 GF Technical Manual - Issue A, July 2011

End of Life

Non Eu Countries

At the end of this product’s life, please ensure that it is disposed of in an 

environmentally friendly manner which is in line with your Country requirements/

guidelines.

WEEE (EU ONLY)

Please be aware that our products are covered by the Waste Electrical and 

Electronic (WEEE) directive (2002/96/EC). The symbol shown above denotes that 

the product should not be disposed of with general/household waste. Please 

contact your supplier/service agent who will arrange for the collection and 

disposal of this product.

ROHS

All Waterlogic machines comply with EC Directive (2002/95/EC) on the Restriction 

of the Use of Certain Hazardous Substances in Electrical and Electrical Equipment 

(RoHS)

.

BIOCOTE® (ANTI-MICROBIAL SOLUTION)

For your added protection this product incorporates BioCote® antimicrobial 

technology. Silver, in the form of silver ions, is the active ingredient utilised in 

BioCote®. This silver technology is manufactured into the surface of our products, 

giving them built-in sustainable antimicrobial protection. 

BioCote’s silver technology has been tested by an independent laboratory to 

show its ability to inhibit the growth of bacteria, mould and fungi by up to 99.9% 

over a 24 hour period and for the duration of the machine life.

FREQUENTLY ASKED QUESTIONS ABOUT BIOCOTE®:

Why use BioCote®?

 

BioCote® will help reduce the risk of cross-contamination. 

You may not want to think about it, but every surface in the working environment 

is a potential breeding ground for Bacteria.

How is it applied? 

BioCote® is applied via an additive into the manufacturing 

process and will, therefore, be present throughout the moulded or painted parts. 

How long will BioCote® last?

 

BioCote® will last for the usual life expectancy of 

your water dispenser. It will not wear or wash out with use or cleaning.

What bacteria is BioCote® effective against?

 

BioCote® is effective against most 

common bacteria, moulds and fungi.

Please note:

 

BioCote® is an additional line of defence to protect between cleaning routines, it is 

not a replacement for your normal cleaning and sanitisation processes.

Description

110v model

220v model

Width/ Depth/ Height

380*370*1140mm

Water connection

¼” hose

Cold water temperature

3 ~ 12°C

Hot water temperature

83-85°C

Net weight

26.7kg

Packed weight

30.58kg

Power supply

110V

220-240V

Heater

500W

Summary of Contents for WL 1000 GF



















Reviews: