ICE 900 Supplemental Service Manual
Page 37 Revision 3-19-2019
SANITIZATION
1.
Remove Top Cover to access the Ambient Tank– remove the two screws from back of the
Top Cover. Slide the Top Cover towards rear of the ICE 900 and lift Top Cover Up.
FLUSH HOT TANK
2.
Access the Ambient Water Tank by removing the Tank Cover – rotate counter clockwise
as shown and fill the Ambient Tank 2-3 times to ensure that any odorous tastes left in the
system lines, etc. are removed.
3.
Remove the Front Bottom Cover to the ICE 900 to gain access to the main filter housing
area and to reveal the filter block.
4.
Remove Hot Flush Valve Cover located above the Filter Block as shown.
Hot Flush Valve Cover
Do not fill past the “fill line” or the
overflow sensor will shut down the
system. If this occurs, see the
Troubleshooting section addressing.
