22
TRUCLIMATE 500 INSTALLATION GUIDE
Installation Information: Bypass and Temperature Headers
1.
Install header bypass header pipes with grooved couplings to the header rack as shown below. Tighten the large grooved
fittings just enough so the headers are supported and can still be moved side-to-side. This freedom of movement is neces-
sary when installation the second floating flange.
1/2" NPT BUNG
1/2" NPT BUNG
1/2" NPT BUNG
1/2" NPT BUNG
CUT GROOVE PER VIC 25.01 REV J
CUT GROOVE PER VIC 25.01 REV J
CUT GROOVE PER VIC 25.01 REV J
CUT GROOVE PER VIC 25.01 REV J
WATER PRESSURE
SENSOR
WATER TEMP
SENSOR TYPE II
WATER PRESSURE
SENSOR
WATER TEMP
SENSOR TYPE II
Headers should
be able to move
from side to side
Do not
fully tighten
