Copyright 2004 Waterford Precision Cycles, Inc. - All Rights Reserved.
Page - 4
Assembly Instructions
A. Establish a roomy assembly area, close to the area to be used for fitting.
B. Prior to assembly, you will want to acquire the appropriate tools and non-supplied parts:
C. Proper and safe assembly requires average bicycle mechanic skills, including the ability to:
•
Install a cartridge bottom bracket.
•
Install a crank and chainrings.
•
Install a bicycle chain
•
Install a rear cog
•
Install a nutted rear wheel
Item
Qty Description
1
1
Allen wrench - 4mm
2
1
Allen wrench - 5mm
3
1
Allen wrench - 6mm
4
1
Allen wrench - 8mm
5
1
Allen wrench - 10mm
6
1
15mm axle wrench
7
1
Chain tool
8
1
Spanner wrench for bottom bracket installation
9
1
Angle Finder
10
1
Cleaning solution to improve label adhesion.
11
1
Grease for lubricating all threads.
Tools for Assembly and Operation
Step 2: Unpack Cartons.
Step 1: Preparation
A. Remove all parts and check in against the parts list.
B. Level the base using the leveling screws on each leg..
Step 4. Install the resistance unit.
Step 3. Install the rear wheel support.
Use the parts bag #3 to connect the unit (#2) to the
base (#1). Please note that the resistance roller
mounts under, not behind the wheel.
Use the 4mm allen screws from the bolts bag #4 to connect the support
(#5) to the base (#1).
Be sure to lubricate all threads before securing parts.
