background image

Note:

Daily cleaning and proper maintenance have a crucial impact on the durability of your hob and it is 
recommended that the hob is always cleaned after every use.

To clean the hob:

* Wipe off slight, not burned patches of dirt using  a damp cloth without a cleaning agent.  

Washing liquid can cause blue discolouration to  appear on the plate and these stains may not be 
removable after first cleaning.

* Remove larger patches of dirt, strongly sticking  to the plate using a sharp scraper and wipe off the 

surface with a damp cloth.

* If any plastic item, kitchen foil, sugar or food containing sugar is accidentally allowed to melt on the hot 

surface of the hob, remove immediately with a scraper while the cooking surface is still hot to avoid the 
risk of damage to the surface.

* Never apply any form of cleaning agent on a hot surface of the hob.

For any other maintenance or repair issues, contact Waterford Stanley Service Department on 051-302333
for customers in the Republic of Ireland or 028-87722195 for customers in Northern Ireland.  When contact-
ing the Service Department please quote your hob’s individual serial number, this can be located on the rat-
ing plate which is on the underside of the hob or the front cover of the manual.

CLEANING & ROUTINE MAINTENANCE

8

Summary of Contents for Ceramic Hob












Reviews: