Figure 7
Fluoride Filter Installation *
(
Only applicable to WD-TK-F/WD-TK-FS
)
Place the Upper Chamber (6) upside down, and screw each Fluoride Filter (9) with the "IN" indicator to the
threaded rod of the corresponding Carbon Filter (5). Flip the Upper Chamber over for installation. (Figure 6)
Step 5-Upper and Lower Chamber Assembly*(* denotes optional)
Place the Upper Chamber (6) gently into the Lower Chamber (10), cover it with the Lid, and put the
Lower Chamber (10) onto the Stand (12). The Stand (12) is only applicable to WD-TK-S/WD-TK-FS.
(Figure 7)
Step 6-Flush the Filtration System
Fill the Upper Chamber (6) with water, then empty the first bucket into the Lower Chamber (6) and
repeat the process. You can drink water from King Tank after flushing it 2-3 times.
Figure 6
6. Upper Chamber
9. Fluoride Filter
10. Lower Chamber
12. Stand
6. Upper Chamber
Do not use with microbiologically unsafe or unknown quality water without
adequate disinfection before or after the system.
NOTE:
5
