Figure 1
Figure 2
Prior to assembling the water purification device, it is necessary to clean it completely. Before cleaning
the components, please wash your hands. (It is important not to clean the carbon and fluoride filters
so as to prevent contamination during the assembly process.)
Product Specifications
Installation Instructions
Step 1-Lid Knob Assembly
Insert a Lid Knob (1) into a Lid (2) and secure it with a Knob Screw (4). (Figure 1)
Step 2-Spigot Assembly
Insert a Spigot (15) into the hole on one side of the Lower Chamber (10), and tighten a Spigot Hex
Nut (11) with an attached Wrench (13). (Figure 2)
15. Spigot
WD-TK/WD-TK-F/WD-TK-S/WD-TK-FS
System Model
Carbon Filter Capacity
Fluoride Filter Capacity
Operating Temperatures
System Capacity
Up to 6,000 gallons in total
Up to 1,000 gallons in total
40-100 °F (4 - 37 °C)
2.25 gallons
3. Knob Washer
4. Knob Screw
2. Lid
1.Lid Knob
11. Spigot Hex Nut
13. Wrench
10. Lower Chamber
3
