Step 5:
Connect Tubing
1. Install the “INPUT” Water Tubing
•
Remove the plug from “INPUT” water port;
•
Identify the white 3/8” PE tubing which has been attached to the feed water adapter
(Figure 11);
•
Insert the other end of the tubing into the “INPUT” water port (Figure 12), and pop the lock
clip on the fitting.
NOTE:
Make sure it is fully inserted until you reach the mark on the tubing.
NOTE:
Confirm the tubing length you need first, cut the tubing if it’s too long referring to
“How to Use the Quick-Connect Fittings” on page 4.
8
2. Install the “FILTERED” Water Tubing
•
Remove the plug from “FILTERED” water port;
•
Identify the white 1/4” PE tubing;
•
Insert one end of the PE tubing into the quick-connect fitting on RO faucet (Figure 13), and
pop in lock clip on the fitting;
NOTE:
Make sure it is fully inserted until you reach the mark on the tubing.
•
Insert the other end of the tubing into the “FILTERED” water port (Figure 14), and pop lock
clip on the fitting.
NOTE:
Make sure it is fully inserted until you reach the mark on the tubing.
Quick-connect Fitting
on RO Faucet
“FILTERED”
Water Tubing
“INPUT” Water Port
“INPUT” Water
Tubing
Lock Clip
Lock Clip
“FILTERED” Water
Tubing
Feed Water Adapter
“INPUT” Water Tubing
Figure 11
Figure 13
Figure 12
Figure 14
“FILTERED” Water Port