I
WN
LED REPLACEMENT LIGHT INSTALLATION
Waterco Britestream LED Fibreglass Niche Pool Lights
Disconnecting the LED light
•
Disconnect power to light at the circuit breaker.
•
Remove the light lens (1) by turning turning the light lens to the left unscrewing from the outer
flange body (7). This will allow the lens assembly to be removed from the pool/spa water, but
will still be connected to the body (7) via the 1m coiled power cord that is stored within the
body (7).
•
Remove the black power cable gland nut and Black gland (6) and slide back along power
cable. Unscrew (turn to left) the gland mount cap (5) exposing the two power wires.
Note:
These two wires are connected to the LED light assembly via two quick connect electrical
spade connectors (4). These can be either disconnected by pulling apart or simply cutting the
two power wires.
You have know successfully disconnected the existing LED light assembly and are ready to
reconnect a new LED light assembly.
1
2
3
4
5
6
7
8
9