Waterco OXISWIM, Quick Reference Manual

Page: 4 / 16

OXISWIM Quick Reference Guide
Page | 4
When starting up an Oxiswim Dual sanitation system on a new pool it is important to follow
some easy basic steps on water chemistry.
Step 1. Always start with balanced pool water.
Test and balance the below parameters
Test Result
Free available chlorine 1.0ppm – 2.0ppm
pH level 7.2-7.6
Total Alkalinity level 60ppm – 80ppm
Calcium Hardness 180ppm-400ppm
Salinity (= total Pool salt & Mineral Crystals) For low salt cell use* 2000ppm – 3000ppm
Phosphate level Less than < 0.5ppm
pH Adjustment chemicals
To decrease pH - Use Perox pH Control or Aqua Health pH Decreaser (Dry Acid)
To increase pH - Use Aqua Health pH Increaser
Total Alkalinity adjustment chemicals
To decrease Total Alkalinity – Use Perox pH Control or Aqua Health pH Decreaser (Dry Acid)
To increase Total Alkalinity – Use Aqua Health Alkalinity increaser
Calcium Hardness adjustment chemicals
To increase Calcium hardness – use Aqua Health Hardness increaser.
Follow all instructions on the product packaging for dosage rates required.