OXISWIM Quick Reference Guide
Page | 16
PEROXIDE Pump
For the Peroxide Pump, the default setting is for a 50,000 litre pool. The peroxide pump is
linked to the GPO outlet. The on/off times displayed on the screen will activate the GPO
when the switch box is set to Automatic. When the switch box is set to manual the GPO will
operate independently of the timer setting on the Peroxide Pump. The swimming pool
pump should be connected to the GPO on the control panel to ensure water is flowing when
the chemical pump is active. To increase or decrease the peroxide dose rate, change the %
feed in the top right-hand corner. To scroll through the setting in each menu use the tick
button(
) to scroll right and the ESC button (
) to scroll left. Use the up and down
button to change the setting values. When completing any changes in the menu always click
the tick button(
) get to the end of the changes to save the settings.
