2.6 ELECTRICAL INSTALLATION
Hydroxzone ozone generator is designed to operate on either 120 or 240 VAC, 50/60 HZ.
Connect theHydroxzone ozone generator either to the circulation pump switch or timer.
Hydroxzone ozone generator unit and circulation pump should be started simultaneously. Refer
to national electrical codes or local code grounding and installation procedures for swimming
pool equipment.
Avoid running the ozone unit on short cycles. The useful life of the UV lamp will be reduced if
stop/start operation is performed. Continuous operation of 4 to 8 hour periods per day is highly
recommended.
2-7 Installation on flooded condition
IMPORTANT:
Hydroxzone must run when the pump is operational. Damage to
unit may occur if air does not pass through the unit for prolonged periods of
time.
i
CAUTION:
Make sure the voltage is the same as prescribed on the side of the
HYDROXZONE ozone generator. Over voltage will void customer warranty.
