6.6 Schedule Advance
Danger:
Do not perform any maintenance on the motor while the motor is in
Schedule Advance Mode. The motor may start without warning. This event could
cause death or serious personal injury.
The Schedule Advance mode allows the user to press the START button at one time
of the day, with the 24-hour schedule starting at a different time of day. The Waterco
ECO-V 150 can run in the Schedule Advance mode (by using the OVERRIDE
button) and upon completion will begin the programmed 24 hour schedule at STEP 1
DURATION and SPEED.
The following steps should be followed to set Schedule Advance mode:
1. With the Waterco ECO-V 150 stopped, press and hold the START key for more
than three (3) seconds. The START LED will blink at a rate of one second per pulse.
The DURATION setting LED and respective bar graph LED will remain turned ON
until the Schedule Advance mode is complete.
Refer Joey re chart image
2. Press the UP (+) or DOWN (-) arrows to set the desired delay time after which the
24-hour schedule should start. The Schedule Advance mode will automatically start
after the desired delay time is selected. The Schedule Advance mode can be
cancelled by pressing the STOP key.
Note:
The OVERRIDE button will still function when the Schedule Advance mode is
active. This will allow the user to run the Waterco ECO-V 150 during the period of
the Schedule Advance mode.
Summary of Contents for Hydrostorm ECO-V 150
Page 29: ......
