WaterBoss 700, Owner'S Manual And Installation Manual

Page: 14 / 36

WaterBoss Softener Owner’s Manual 1/14/2011 14
Four-Button Controller
This appliance features a four-button controller with an LCD display.
The controller can be used to view the appliance’s status, perform
regenerations, and change settings. The controller must be set up
correctly for the appliance to perform properly.
Note: Ensure that the bottom of the controller is firmly locked onto
the four tabs on the top of the drive end cap assembly. See Cabinet
and Cover Assemblies diagram later in this manual.
Figure 10: Four-Button Controller
Controller Part Function
LCD Display Shows the status of the controller
Demand Mode The controller measures water usage and regenerates based on need, so you do not have to worry
about vacation settings or extra guests. The appliance will regenerate using only the necessary
amount of water and salt. If your power has been off, the appliance will retain programmed settings
indefinitely
Note: You should not need to change from Demand Mode
Soft Water
Remaining Shows the gallons (or liters) of soft water remaining until the next automatic regeneration. Typically,
each person in the household uses about 75 gallons (284 L) per day. Water remaining is in gallons
in hundreds (or liters in hundreds or thousands, depending on how much capacity is remaining).
For example 88 = 8,800 gallons (33 = 3,300 or 33,000 liters)
Recharge/
Regeneration
Status Shows regeneration cycle numbers during regeneration. The read-out will flash with the cycle
number. The flashing regeneration numbers are:
First cycle (01) First Backwash
Second and Third cycles (02) Brine/Slow Rinse
Fourth cycle (03) Second Backwash
Fifth cycle (04) Brine Refill
Sixth cycle (HO) Service (Briefly)
When regeneration is complete, the display shows the number of gallons in hundreds of soft water
remaining. (See above) Regeneration typically is complete in about 30 minutes.
waterMizer
TM Indicates that water is flowing through the appliance; the waterMizer
TM
indicator turns whenever
water is being used; useful for checking for proper plumbing and leaks
powerClean™ Displays when feature is activated. See Power Clean™ Button