Page 20
WATERAX
STRIKER-2/3 Owner's Manual
20
04/2015
Pump Tool Kit
1
2
3
4
6
5
7
8
10
9
11
12
ID ITEM NO DESCRIPTION
QTY
1 700540
A-1884 PRESSING SLEEVE DISTRIBUTOR
1
2 700531
A-4329 PRESSING SLEEVE ROTARY SEAL
1
3 700532
A-4097 PROTECTOR SHAFT
1
4 700090
A-7644 SEAL PULLER FOR 12-28NS
1
5 700642
A-7711 SEAL REMOVAL PRESS TOOL, 12-28N
1
6 600079
A-1888 PULLER FOR SUCTION COVER, ALU. &
PLATED
1
7 600077
A-1886 PRESSING PIN FOR DISTRIBUTOR,
STEEL
1
8 600175*
R-904L SPARK PLUG WRENCH C/W ROD
1
9 600078
A-1887 ALUMINUM GUIDE FOR SHAFT
INSTALLATION
1
10 700588
A-5297 SUPPORT TOOL
1
11 600052
B-4084 PUMP BEARING PRESSING SLEEVE
1
12 600123
B-4085 PUMP BEARING EXTRACTOR TOOL
1
* 600175 contains 800084 (R-904) and 800082 (R-905)
Disassembly Procedure for Pump End
(Similar procedure for the 25-16S)
ID ITEM NO DESCRIPTION
QTY
25-16S
QTY
18-16S
1 700994
DECAL-35 NO GREASE DECAL
1
1
2 700023
A-5536 PROTECTIVE CAP FOR 1-1/2"
DISCHARGE
1
1
3 700041
18-8 PUMP BODY FOR 18-16
-
1
3 700076
25-8 PUMP BODY FOR 25-16
1
-
4 800366
12-73 PLUG, 1/8" BRASS
2
2
5 800363
12-27 O-RING
1
1
6 600380
12-12A SUCTION NOZZLE-
INCLUDES 12-40
1
1
7 800359
12-39 SCREW 1/4-28X9/16 SLOT
FILLISTER SS
8
8
8 800360
12-38 LOCKWASHER 1/4 SPLIT SS
9
9
9 700022
A-5537 PROTECTIVE CAP FOR 2"
SUCTION
1
1
10 700029
12-40 BUSHING BEARING, BRONZE
1
1
11 700069
12-13 NOSE FOR SHAFT, ALU.
1
1
12 800343
12-42 SCREW 1/4-28X3/4 SLOT
FILLISTER NYLONLOCK SS
1
1
1. Remove shaft nose #11, by removing screw
#12 and lockwasher #8.
2. Remove screws #7, and lockwashers #8.
3. With tool 600079, remove suction cover #6.
4. Bend down lockwasher #23 from lock nut #24.
Secure the shaft #14 from rotating and remove
lock nut using tool 600175 or a 19 mm (3/4")
wrench. Discard lockwasher.
5. Remove screws #15.
6. Using an arbor press and tools 700532 and
700588, press out shaft assembly.
7. Using seal puller 700090, remove mechanical
rotary seal #18.
8. Using an arbor press and tools 600077 and
700588, remove all impellers and distributors.
This operation is done in jogging strokes of
press ram.
9. To remove bearing #17 from shaft, use an
arbor press and tool 600123.
Important:
It is recommended to discard all O-
rings, lockwashers and nylon lock screws.
Kits containing replacements O-rings,
lockwashers and nylon lock screws are available
from
WATERAX
(item no 250227 and 250241).
1
2
3
4
5 (26)
6
7
8
9
11
12
10
(1/2)
