11
CLOCK / HOME
RIGHT / NEXT
LEFT / BACK
DISPLAYS & PROGRAMMING
SETTING REGENERATION TIME
Enter the Installer Screens by pressing and holding
+
simultaneously for
3-5 seconds.
Once the display changes, press until you reach the “Regeneration Time” display.
When on the “Regeneration Time” display, use or to adjust the hour. The hours will
cycle through AM and PM.
Press to move the cursor to adjust the minutes. Use or to adjust the minutes.
Advance to the next Installer Screen by pressing OR you can return to the home display
by pressing
ERROR MESSAGE
SOFT RESET (to reset “ERROR” code)
Press and hold
+
REGEN simultaneously for 3-5 seconds until valve resets.
If the word “ERROR” persists, afer a soft reset, and a number are alternately flashing on the
display, contact an authorized WaterTech dealer for service help. This indicates that the valve
was not able to function properly. This is a rarely encountered malfunction.
