background image

Care and Use Guide

REIONATOR

 

Classic

 

Series

with Triton Electronic Control Valve

WQA Gold Seal certifi ed to NSF/ANSI Standards 42 and 

44 for meeting or exceeding industry standards of 

aesthetic chlorine reduction and softening effi ciency.

Water Tech Industries Residential REIONATOR™

LIMITED LIFETIME WARRANTY

Applicable to REIONATOR

 Classic Models:

RC32-TM, RC40-TM, RC48-TM, RC64-TM, RC80-TM

Water Tech Industries (WTI) hereby warrants said equipment, only to the original purchaser at the original 
installation location.

THIS WARRANTY PERIOD BEGINS at the time of initial installation and use. The warranty becomes valid upon 
registration of the equipment.

LIMITED LIFETIME WARRANTY ON CONDITIONER AND BRINE TANK – Water Tech Industries will replace or re-
pair (at WTI option) any conditioner tank that becomes unusable because of leakage, corrosion or rupture. 
All internal mechanical components are warranted for a period of fi ve years from date of installation.

LIMITED LIFETIME WARRANTY ON RESIN – The REIONATOR  has been equipped with the highest quality NSF 
certifi ed water treatment media. If, upon factory inspection, the resin is found to be defective, Water Tech 
Industries will furnish replacement resin. The resin warranty does not cover resins subjected to water con-
taining greater than 3.0-ppm of free chlorine or chloramines or containing greater than 1.0-ppm total Iron 
and/or Manganese. Resin which has been fouled by iron, manganese, organics (or other contaminants not 
designed for treatment by the REIONATOR) is not covered.

LIMITED LIFETIME WARRANTY ON CONTROL VALVE - The REIONATOR  has been equipped with the highest 
quality water conditioning control valves available. If, upon factory inspection, the control valve body or PC 
board is found to be defective, WaterTech Industries will furnish repair or replacement (at WTI option) of 
the control valve body and/or the PC board. All internal mechanical components are warranted for a period 
of fi ve years from the date of installation

EXCLUSIONS AND LIMITATION OF LIABILITY – Water Tech Industries' liability for special, incidental, or 
consequential damages is expressly disclaimed. In no event shall Water Tech Industries' liability exceed 
the obligation of repairing or replacing any part that becomes defective under valid warranty coverage as 
described above. Cosmetic damage that does not affect the process functionality of the equipment is not 
covered. Water Tech Industries makes every effort to ensure that all illustrations and specifi cations are 
correct. However, these do not imply a warranty that the product is merchantable or fi t for a particular 
purpose, or that the product may not vary from the illustrations and specifi cations. The warranty contained 
herein is in lieu of all other warranties, expressed or inferred, including any implied warranty of fi tness 
for a particular purpose. Labor and transportation costs incidental to the delivery or replacement of parts 
other than WTI factory repairs are not covered under this warranty. In the event of a warranty replacement 
or repair, WTI will cover the cost of shipping the covered components. This warranty expressly excludes any 
system which has been damaged by accident, fi re, fl ood, Act of God, abuse, neglect, freezing, excessive 
temperature (below 40° F or above 110° F.), inappropriate pressure (below 20psi or above 100psi), misuse, 
alteration, product identifi cation tampering, misapplication, installation or operation not consistent with 
WTI instructions and installation outside of applicable plumbing codes and local regulations. Fulfi llment 
of the warranty coverage by WTI is contingent on proper execution of the procedures set forth in the WTI 
Warranty RMA policy. No person or representative is authorized to assume for Water Tech Industries any 
liability on its behalf, or in its name, except to refer the purchaser to this warranty. This warranty gives you 
specifi c legal rights, you may also have other rights which vary from state to state.

WHAT MUST YOU DO TO OBTAIN WARRANTY SERVICE - The warranty registration card must be fi lled out 
completely and returned to Water Tech Industries within thirty days of installation to validate the REION-
ATOR  Limited Lifetime Warranty. Units that have not been registered will be covered under the Standard 
Product Warranty rather than the Limited Lifetime Warranty. Repair work should be performed by an autho-
rized Water Tech Dealer. In the event that authorized dealer service is not available, defective components 
may be returned directly to Water Tech Industries for warranty service. The registered owner must return 
the defective component, freight prepaid, with proof-of-purchase, within the applicable warranty period.

P: 888-254-8412 • F: 503-261-9118 • 13110-3 NE Airport Way, Portland, OR 97230 • watertech.com

R 10/12/07

Summary of Contents for REIONATOR Classic Series









Reviews: