Water Right Sanitizer Plus, Master Programming Manual

Page: 11 / 16

11
cont’d
TOTAL REGENS
190
TOTAL DAYS
970
MON GPM
12
MAX FLOW HISTORY
TOTAL GALLONS
X1K
0
VVV CYC
TTT
MAV 1 - FIRST
CCC
%BRINE
REGEN
15 100
5
6
7
8
BRINE DRAW TIME 1
4.6 2:17
TOTAL BRINE ERRORS
1
VLT
MIN
First Level History Screens
Accessed by pressing and holding
+
and
–
simultaneously for three seconds.
Returns to general display after five minutes of inactivity.
Displays peak flow rate history
Use
+
or
–
buttons to scroll through last 7 days to view peak
flow rate for that day.
Displays brine concentration history
Use
+
or
–
buttons to scroll through last 50 regenerations to view brine
concentration. Units with multiple brine cycles only record the first one.
Displays voltage consumed and brine draw time
Use
+
or
–
buttons to scroll through last 50 regenerations to view voltage
consumed along with the time it took to draw brine from tank.
Displays voltage consumed and brine draw time
Errors will be recorded from all brine cycles.
Displays MAV drive time history for an active MAV 1 output
Use
+
or
–
buttons to select a MAV output. Pressing both
+
and
–
buttons
will reset this display.
•
First = Average of the first three drive times measured for that MAV in that direction.
• Last = Last drive time measured for that MAV in that direction.
•
Ave = Current average drive time calculated for that MAV in that direction.
• TTT = Relative MAV drive time measured (First/Last/Ave).
•
CCC = Total number of cycles in/out for that MAV.
• VVV = Relative MAV drive voltage measured (First/Last/Ave).
Displays total days unit has been in service
Displays total regens since startup
Displays total gallons used by Meter 1
input since last reset
Press and hold
+
and
–
buttons simultaneously for
three seconds to reset this value back to 0 gallons.
Only appears on units
equipped with chlorine
generator option
Only appears on
units equipped
with MAV.
return to
general display
continued from
previous page