Water Hero P-100, Installation And Operation Manual

Page: 4 / 28

Water Hero P-100 is plumbed into a water
supply line. Improper installation can cause
leaks. Ensure installation is completed
by a licensed plumber and abides by the
following guidelines:
• In accordance with state/local building
codes
• Wear personal protective equipment
when installing the Water Hero P-100
• Do not open the Water Hero Main
Controller or Sensor Cap. If you have
trouble , contact Water Hero support
• Use the Water Hero only where it
complies with applicable rules and
regulations
• Install the Water Hero P-100 System
indoors where it will not be exposed to
direct sunlight, water or extremely low
or high temperatures. No exposure to
water. RH < 90%; Temp 0 to 140 F
• Accuracy of the Water Hero P-100 is
dependent on flow rate – accuracy is
typically within 10%
All Water Hero terms and conditions,
privacy policies and warranty
policies can be found on the Water
Hero website
www.waterheroinc.com/legal
For installation and technical support
questions, reach out to us at:
support@waterheroinc.com
Warning Terms & Conditions
Contact Us
3