Water Hero P-100, Installation And Operation Manual

Page: 24 / 28

Perform a network reset or modify e-mail account*
Note: Only perform a network reset when Water Hero must be paired to a
new WiFi network or associated with a new e-mail address, as repeated
Network Resets can make your device unstable!
Troubleshooting
1. Press and release Button 1; all LEDs illuminate
2. While all LEDs are illuminated, press and hold Button 3 until the red
LED turns off
3. After approximately 15 seconds, yellow LED will illuminate and the
green LED will blink; Water Hero will be in Access Point mode*
4. Follow directions on P. 8 to connect Water Hero to network
*Due to battery back-up unplugging the device will not reset the device
23