Water Hero K-100, Installation & Operation Manual

Page: 3 / 26

Warning
Terms & Conditions
2
Water Hero K-100 is secured to an
existing water meter and has been tested
to function with industry leading brands
and models.
•
If attaching to a utility meter, ensure
that you conforming with applicable
local rules and regulations
•
Do not open the Water Hero Main
Controller or Flow Sensor. If you have
trouble, contact Water Hero support
•
Install the Water Hero K-100 indoors,
where it will not be exposed to direct
sunlight, water or extremely low or
high temperatures. No exposure to
water. RH < 90%
•
Flow readings displayed by the Water
Hero K-100 are only as accurate as the
existing water meter it is secured to.
This may inhibit detection of low flows
(e.g. less than ¼ gal per min). Accuracy
is typically within 10%
All Water Hero terms and
conditions, privacy policies and
warranty policies can be found
on the Water Hero website
www.waterheroinc.com
Contact us
For installation questions, reach
out to us at:
support@waterheroinc.com