background image

 

11 

 

 

Your Water Claw sub-surface extraction tool is designed to give you years of reliable service.  

If a problem should arise contact your distributor or Water Claw for assistance. 

 
Water Claw warrants the Water Claw sub-surface extraction tool to be free from defects in 

material or workmanship for one

 

year from the date of purchase.  

 

During the warranty period, Water Claw will, at its option repair or replace components which 
prove to be defective. This warranty does not provide for replacement of complete units due 

to defective components. Any costs for transportation or related service labor are not covered 

in this warranty. Replacement parts are warranted only for the remainder of the original 

warranty period. 
 

This warranty shall not apply to defects resulting from improper operation, lack of 

maintenance, unauthorized modification, chemical incompatibility, misuse, abuse or exposure 

to freezing temperature conditions. It does not apply to items which require replacement as a 
result of ordinary usage. 

 

To obtain warranty service for the Water Claw, contact your distributor or Water Claw. If the 

tool must be returned to Water Claw or an authorized service center, the purchaser shall 
prepay shipping charges for products returned for warranty service. No returned items will be 

accepted by Water Claw without prior authorization. All returns must have a return 

authorization number, issued by Water Claw, clearly marked on the exterior of the package. 

 
Water Claw makes no other warranty either expressed or implied with respect to this product. 

 

The remedies provided herein are the purchaser’s sole and exclusive remedies. In no event 

shall Water Claw be liable for any direct, indirect, special, incidental or consequential damages. 
 

This warranty gives you specific legal rights. You may also have other rights which vary from 

jurisdiction to jurisdiction. 

 
 

 

 

 

LIMITED WARRANTY  

Summary of Contents for AC016












Reviews: