WatchGuard XCS 1180 — Rack Mount Kit
3
Rack Mount Rail Installation
Separate the Inner Rail Pieces from the Outer Rails
There are four inner rail pieces that must be attached to the XCS device (two inner rail pieces per side).
Two of the inner rail pieces come attached to the two outer rails. The other two inner rail pieces are included
separately in the shipping box.
Remove the two inner rail pieces from the outer rails before you begin.
Attach the Inner Rails Pieces and Ear Brackets to the XCS Device
Use these steps to attach the inner rail pieces and front mounting brackets to the XCS 1180 device.
1. Position two inner rails along one side of the XCS 1180 chassis. Make sure that the finger tabs are facing
out and are positioned towards the rear of the unit.
2. Align the screw holes in the rails with the holes on the sides of the XCS device.
3. Attach each inner rail piece to the chassis with five of the included cross-head screws.
4. Use the small black screws provided with the front ear bracket to attach the ear bracket to the front of
the device.
5. Repeat these steps to attach the other two inner rail pieces and front ear bracket to the other side.
Inner Rail Pieces
Outer Rails
Inner Rail Pieces
Ear Bracket
