18
4.2. Adding a Detector
+
TO ADD A DETECTOR
1.
Turn the system off, from the power supply or
unplug. Wait 10 seconds.
2.
Turn the system on.
3.
Press the tamper switch inside the detector. The
lights in the detector will flash and the system will
beep 4 times to signify that a valid detector has
been learnt in.
4.
To test the detector, wait 10 secs before pressing
the tamper switch again. If the detector is correctly
learnt in, pressing the tamper switch will activate the
siren. To stop the siren and disarm the system,
follow the disarming procedure outlined in section
3.1 of the manual.
