30
4.7. Stay Mode Entry Guard Sound
This selects the type of sound you would like for the stay mode alarm. There are 2
options. Normally, if the alarm is triggered in stay mode the alarm will sound 6 tones
when set to
Entry Guard Tones
. This is used to alert you if someone enters within
the stay mode protected area while you are at home. After hearing the entry guard
tones you may, if you choose, activate panic via the remote control. You can also
choose to have it sound
Full Siren
when an active stay zone is triggered. This only
applies to STAY mode.
Default
Entry Guard Tones
Option 1
Full Siren
TO CHANGE THE STAY MODE ENTRY GUARD SOUND
1.
Safety Lock must be
off
Ensure Safety Lock has been turned off within the last 5
minutes. See
Section 4.2.
2.
Press both buttons
for 3 seconds
Enter Programming mode by pressing
buttons 1 & 2
together for
3 seconds
. The siren will
beep 3 times
to
confirm you have entered programming mode.
3.
Press 1 time
Within 3 seconds, press
Button 1
to select
detector
programming
. You will hear
1 beep
as confirmation.
4.
Press 1 time
Within 30 seconds, press both
Button 1 & 2
together to
select the
STAY mode entry guard sound
. You will
hear
3 beeps
as confirmation.
Continued on next page…
