background image

                                                                     

 

11 

 

Limited Warranty 
 
 
 

Cornick Pty Ltd (Seller)

 

warrants its products to be in conformance with its own plans and specifications and to be free from 

defects in materials and workmanship under normal use and service for twelve months from the date of original purchase. 

Sellers obligation shall be limited to repairing or replacing, at its option, free of charge for materials or labor, any part which is 

proved not in compliance with Sellers specifications or proves defective in materials or workmanship under normal use and 

service. Seller shall have no obligation under this Limited Warranty or otherwise if the product is altered or improperly repaired 

or serviced by anyone other than Seller.   

For Warranty Service:

 Return transportation prepaid with a copy of your purchase receipt and contact details to: 

RhinoCo Technology, 9 Hannabus Place, McGraths Hill, NSW 2756 Australia

Seller has no obligation to attend the buyer’s location to retrieve the goods or make repairs onsite. 

• 

There are no warranties, expressed or implied, of merchant ability, or fitness for a particular purpose or otherwise, which 

extend beyond the description on the face hereof. In no case shall seller be liable to anyone for any consequential or 

incidental damages for breach of this or any other warranty, express or implied, or upon any other basis of liability 

whatsoever, even the loss or damage is caused by its own negligence or fault. 

• 

Seller does not represent that the products it sells may not be compromised or circumvented; that the products will prevent 

any personal injury or property loss by burglary, robbery, fire or otherwise; or that the products will in all cases provide 

adequate warning or protection. Customer understands that a properly installed and maintained alarm system or video 

surveillance system may only reduce the risk of a burglary, robbery, or fire without warning, but it is not insurance or a 

guarantee that such will not occur or that there will be no personal injury or property loss as a result. 

• 

Consequently, seller shall have no liability for any personal injury; property damage or other loss based on a claim the 

product failed to give any warning. However, if seller is held liable, whether directly or indirectly, for any loss or damage 

arising under this limited warranty or otherwise, regard less of cause or origin, seller's maximum liability shall not in any 

case exceed the purchase price of the product, which shall be the complete and exclusive remedy against seller. 

• 

This warranty replaces any previous warranties and is the only warranty made by the Seller on this product. No increase or 

alteration, written or verbal, of the obligations of this Limited Warranty is authorised. 

 

 

Please refer to the website (

www.watchguardalarms.com.au

) for a full list of trading terms. 

 

 

 

 

HELPDESK:

 Phone 02 4577 4708   

9am – 5pm Mon- Fri 

 

 

 

 

 

 

 

 

Summary of Contents for DVR4ENTPACK














Reviews: