The AP325 operates in AP combo mode where the 2.4 GHz and 5 GHz radios work in AP mode to
broadcast Wi-Fi, while the third radio operates in WIPS (Wireless Intrusion Prevention System) sensor
mode (Wi-Fi Cloud management only).
Device Indicators in AP Firmware 8.8.1 and Higher
LED
Status
Description
Power
Off
Powered off.
Solid
Green
Powered on.
Flashing
Green
AP cannot connect to Wi-Fi Cloud or the Gateway Wireless Controller.
Flashing
Amber
AP did not receive an IP address from the DHCP server.
LAN1
(PoE)
Off
No Ethernet link.
Solid
Green
Network interface is up and connected at 10/100/1000 Mbps.
LAN2
Off
No Ethernet link.
Solid
Green
(Wi-Fi
Cloud
mode)
8.8.2 and higher: For APs with additional LAN ports, interface will be green if the
interface is up and a wired extension or link aggregation is enabled on the
interface in Wi-Fi Cloud.
8.8.1: Network interface is up and connected at 10/100/1000 Mbps.
Solid
Green
(Local
mode)
Network interface is up and connected at 10/100/1000 Mbps.
2.4
GHz
and
5 GHz
radios
Off
8.8.2 and higher: No SSID enabled on the radio.
8.8.1: Wireless radio is inactive.
WatchGuard AP325 Hardware Guide
6
WatchGuard Technologies, Inc.
