Watchguard AP 320, Hardware Manual

Page: 8 / 32

6 WatchGuard AP320
Hardware Specifications
Device Indicators in WIPS Mode
These indicators are active when the AP device is set to dedicated WIPS (Wireless Intrusion Prevention System)
mode. For more information about WIPS mode, see the WatchGuard Wi-Fi Cloud help.
If the Ethernet connection for an AP320 device drops down to 10/100 Mbps, the amber indicator for
LAN1 will flash while the green indicator for LAN1 remains in its original state. The amber indicator
for LAN1 may continue to flash even if the Ethernet connection switches back to 10/1000 Mbps
mode. These indicators return to normal operation after you restart the AP device.
Power LAN1 LAN2 2.4 GHz 5 GHz Description
Solid green Solid green On/Off Solid
green Solid
green Powered on and operating
correctly. Connected to
WatchGuard Wi-Fi cloud
services.
Solid green Solid green On/Off Solid
green Fast flash Troubleshooting in progress on
802.11a/b/g/n.
Solid green Solid green On/Off Solid
green Slow flash Intrusion prevention in
progress on 802.11a/n/ac.
Solid green Slow flash On/Off Slow flash Off Software upgrade in process.
Solid amber Solid green On/Off Any Any No Ethernet link.
Solid amber Fast flash On/Off Any Any Did not receive a valid IP
address from DHCP.
Solid amber Slow flash On/Off Any Any C annot connect to
WatchGuard Wi-Fi Cloud
services.
Solid amber Any On/Off Solid
Green Any Error on 802.11a/b/g/n
interfaces.
Solid amber Any On/Off Any Solid
green Sensor software error.
Off Off Off Off Off Not powered on or in startup
process.